How To Research Ghost Immobiliser Problems Online

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft with the Ghost Immobiliser. This system is discrete and doesn't require additional key fobs in order to operate.

The device uses existing buttons on your vehicle (steering wheel, door panels & centre console) to create a unique pin code sequence up to 20 presses long. This will allow your vehicle to begin.

Simple PIN code Change Process

With the rising rate of vehicle thefts, many owners are seeking to improve their security. There are a myriad of aftermarket security devices available including tracking systems, alarms and immobilisers. However, not all of these are equally effective in protecting your car. While a tracking system may help you find your car in the case of theft, it can not stop the crime from occurring in the first place. An immobiliser, on contrary does exactly what is a ghost immobiliser it says on the tin: it disables your car's engine to prevent it from being started. The autowatch ghost immobiliser cost Ghost immobiliser is one of the most advanced options available on the market, making it nearly impossible for thieves to take your car.

Using the existing buttons in your car The ghost device is able to create a unique sequence which must be entered before the car's engine can start. This can be done using the indicator stalk, window or heater buttons. In addition to this it is possible to use an app on mobile that acts as an emergency PIN code bypass and allow the driver to operate the car without the button sequence. This option is particularly beneficial if you have to hand your car over for valet parking or maintenance because the immobiliser will remain active and not deactivated.

The Ghost is a truly unique and ingenious device that works in conjunction with buttons of your car instead of being a separate unit. This means that it is not just a highly effective security measure against theft from your vehicle but it can also be transferred over to any future cars you may have, making it more valuable than the traditional lock on your steering wheel.

Small, weatherproof device

The Autowatch ghost immobiliser is an advanced security device that protects your car from key cloning, hacking & ECU swapping. It's a weatherproof, tiny device that connects directly to your vehicle's ECU via the CAN data bus to shut down the engine. It can be plugged into the vehicle without additional wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices which is a common technique used by car thieves to circumvent the immobilisers in place.

The benefit of CAN data over traditional systems is that they operate in a silent manner. It isn't detected by sophisticated RF scanning and code-grabbing technologies as well as recognized by conventional diagnostic tools. The Autowatch ghost installations review doesn't emit LEDs, but instead utilizes the buttons in your vehicle such as steering wheel, centre console or door panels to create a unique, programmable disarm sequence. This sequence can be extended to up to 20 presses for additional security. The iPhone app is limited to one connection, and comes with an individual pairing code for the Ghost. All communication between the two devices is protected.

The Ghost also prevents car thieves from adding the key to a new car or replacing the ECU to bypass the immobiliser and begin the engine. The engine will only run if a valid PIN code has been entered. It is also possible to put it in valet/service mode to allow for temporary operation (with defined parameters like a 30mph speed limit) to allow you to hand your car over to a valet service or to be serviced without needing to enter a PIN code.

Every vehicle is tested

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device detects electronic signals to disable your car's system from running its normal startup routine until you input a custom passcode. The system can be turned off or on through your smartphone's app, without the need for extra wires.

The factory-installed immobilisers function by using a transponder that is embedded in the key. It transmits a message to the ECU. If the correct code is sent, the car will start, but if a transponder is replaced by one from another vehicle the immobiliser won't recognize it. This allows the vehicle start and be stolen. A South African company that is at the forefront of car security systems technology created the Ghost immobiliser. It protects your car from key cloning, hacking and even key theft. The only way thieves could take your car is by physically towing it away, and even then they wouldn't be capable of driving it.

Ghost uses the buttons in your car, such as the indicator stalk, steering wheel and door panels to generate an unique, changeable PIN code sequence that must be entered before you can use your car. This is performed without the need for extra hardware such as a key-fob and can be up to 20 presses long. It is also undetectable by devices for diagnosis and transmits radio frequency signals, meaning thieves cannot use sophisticated RF scanners or code grabbing technologies to identify that an installation has been made.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks, bmw m3 ghost installer is covertly integrated into the vehicle, so it cannot be removed or disabled by thieves. It's more difficult to remove than a car alarm that requires disarming using the use of a button sequence. This makes it an excellent supplement to a GPS tracker, which can help locate your car after it has been stolen.

Emergency PIN code override

You don't have to look too far on social media to find stories or even videos of vehicles that were stolen by car thieves using the latest technology tools available to them. This includes key-cloning and hacking devices that allow you to start your car without the original key fobs.

Our Ghost immobiliser fights this issue and offers an additional layer of protection to stop your vehicle from being taken in the event of being targeted by thieves. It is created by creating an unique pin code sequence that is triggered by your existing buttons on the steering wheel, door panel, and centre console. This unique PIN has to be entered in conjunction with your original key fob to prevent the vehicle from starting. The unique override pin is on the black card you will receive after installation and is easy to remember because there aren't any LEDs.

The device is hidden within the vehicle's wires and doesn't emit any radio signals, which means it can't be detected by modern thieves using diagnostic software that can detect the type of security system you have installed. This makes it a fantastic alternative to the tracking device.

Contrary to most security systems, which have a relay inside the engine bay, CANBUS Immobilisers communicate with the car's ECU and BCM via the CAN data bus (brand dependent). This allows them to block the vehicle completely by sending a digital block to the ECU and engine.

It is also possible to connect an analogue immobiliser, alarm or tracker to these systems, however this must be specified before installing the device. They are also service/valet-mode compatible and a great alternative to a tracker having your car in for repair at the dealership.

Service/Valet Mode

In recent years, there has seen an increase in the number of cars being stolen with the owners' keys. It is more easy than ever to steal your pride & joy with the availability of key cloning tools & door lock picks. To combat this we are now offering the Autowatch Ghost immobiliser that prevents your car from being driven even if your keys have been copied or your car has been hijacked.

It directly communicates with your cars ECU (Engine Control Unit) via the CAN data circuit. It's completely silent as it doesn't utilize radio frequencies or keys fobs. This means it cannot be detected by diagnostics or other car hacking devices. It also prevents the user from using an ECU or key to bypass the system since only the PIN code allows the engine to be started.

The device is concealed inside your car, using buttons on the steering wheel, centre console and door panels. A unique and reversible PIN code sequence that can be as long as 20 digits has to be entered before you are able to start your car.

This is the first aftermarket CAN bus immobiliser to be developed that can prevent your car from being moved away or even started in the event that a PIN code hasn't been entered before. If the device is activated and you attempt to drive away, it will display an indication on your dash which will flash regularly for around 300m. If you type in your PIN code at this point it will disable the anti-hijack and your car will continue to drive as normal. If you do not enter your PIN code at this time the indication will keep flashing & will require another PIN code for every attempt to start your car.