The Most Common Mistakes People Make With Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they do not get rusty or decay.

It is essential to clean and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and may even be fatal. It is essential to take the time to ensure that you're doing all you can to ensure that your windows are in good repair.

For single pane windows it is relatively easy to replace windows, and the new one is usually able to fit into the frame of the previous one easily. If you have double glazed window repairs near me-paned windows which are held together by internal beading, it is more difficult to remove and replace the old panes. In this situation you'll need find some plastic spacers that will help the new pane to fit correctly into the window frame.

If you're planning to try to remove the window panes by yourself it is important to wear the appropriate safety equipment, including thick gloves and eye protection. It is also recommended to lay down a drop cloth prior to when you start working on the glass, so that any shards fall onto the cloth rather than on the floor, where they could be trodden under and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to stop water and drafts from entering the property until a professional comes out and fix the window. This also serves as a barrier to prevent any criminals from getting into your home. If the distance between the window and the door is large, you might need to consider a security screen that also has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. However, with time, they can suffer from a variety of problems including sagging. A sagging uPVC window can cause issues with light, draughts and even security. It is crucial to act when you realize that your uPVC windows are sliding.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll need open the window so that you can access the frame. Then, you can remove the top and bottom hinges using a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close the window and test it for fitting. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in the right place.

If you are unable to move the hinges, you could need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loosen. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and safe from drafts.

upvc window repair handles can also loosen up. This is typically caused by screws that have been removed over time, but it could be due to the handle mechanism getting worn out. It's fairly simple to fix a loose uPVC handle. You'll first need to close the window and perform a test fitting. The joint at the corners of the sash should align with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it's important to take action. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on how serious the issue is, the old caulking may have to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.

It is important to check that the drainage holes are free of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread across the home.

If the leakage occurs between the double-glazed window, it is more likely that the issue is more with the seal than the frame. It is also possible to be fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it blows open with an ease. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. Changing a window hinge is essentially a very simple process but it can be easier to do if you have someone to help you hold the frame up.

It is also important to ensure that the uPVC hinges are opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue could be caused either due to opening the window in the wrong way or a faulty installation at the factory. This issue can be fixed by sending us a picture on our website. We will be pleased to offer you suggestions.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant to the hinges is a good way to do this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. Ideally, you should perform this every year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC Window Repair.

5. Draughts

Draughts in upvc windows can be caused by different factors. The hinges can also become misaligned due to wear, causing an opening where the sash meets frame. They can be repaired by giving them good clean, but in the event that they are beyond repair it could be necessary to have them realigned or replaced. In addition, the interlock could be disaligned. This is located on the hinge side and could require to be cleaned. In some cases it might be necessary to replace the hinges.

The next common reason for draughts is window seals. These can become worn down or damaged over time and will allow air to escape through these gaps. Installing high-quality weatherstripping can help stop draughts. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures and decrease the risk of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. These will help to block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repair, your upvc windows will continue to provide an excellent level of insulation and security for your home. It is crucial to recognise that all windows have a lifespan and they may reach an point at which it is more cost-effective to replace them rather than fix them. If you are experiencing issues with your window made of upvc you should consult a professional as soon as you can.