Five People You Should Know In The Repairs To Upvc Windows Industry

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they are not susceptible to rust or rot.

It is essential to clean and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good shape.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames that were previously in use very easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this situation you'll need source some plastic spacers to help the new pane to fit properly into the window repair frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled.

It's a great idea cover the gap with tape after the glass has been removed. This will keep drafts and water from getting into your property until a professional is able to repair the window. This will also provide an obstruction to prevent intruders from getting into your home. If the gap is particularly large, you might be interested in an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. As time passes, they may develop a number of problems, including sliding. A sagging window can cause problems with light, draughts or even security. It is crucial to act when you realize that your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. To do this, you'll have to open the window so that you can access the frame. With the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit of the window, tighten the screws to secure them in the right position.

If you aren't able to move the hinges you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to lose tightness. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and safe from drafts.

uPVC handles may also become loose. The majority of the time this is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. Luckily, it's not difficult to fix the loose uPVC window repair handle yourself. First, you'll need to close the window and do an initial fitting. The joints at the corners of the sash should align with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it's important to take action. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be completed by any DIY expert. Depending on how serious the issue is, old caulking may need to be removed. It is important to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk in order to make the area more difficult to clean and decrease the efficiency of your energy usage.

Check that any drainage holes have no debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious situations, you might need to consider replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and can quickly spread throughout the house.

It is also important to keep in mind that if the leakage originates from the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open with a breeze, it may be the hinges that are at the fault. They can be repaired by any DIYer who is skilled and can usually be done within a few minutes.

Like any mechanical component hinges will wear out over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is easier with someone else to help you hold the frame up.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. You can do this by looking for the arrows on each hinge, this indicates which way the window should be opened.

The issue can be caused by opening the window improperly or by a poor installation in the factory. Sending us a picture via our website will often solve the issue. We are always happy to provide suggestions.

It is also essential to lubricate the hinges regularly. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the chance of windows sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of various factors. First, the hinges due to wear and tear could become misaligned. This can cause a gap to form where the sash meets the frame. If they are beyond repair, it may be required to realign them. The second is the interlock, which is located on the hinge side of the window repair and can also be misaligned, and again it may be possible to just give them a clean but in certain cases, it may be necessary to have them replaced.

The second most frequent reason for draughts is window seals. They can become worn down or damaged over time and allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help control indoor temperatures, and reduce the possibility of draughts.

Another, and most effective ways to cut down on drafts is to use an draught excluder. These are typically made of fabric filled with some type of filler. They can be placed on the top of your windowsill. They can keep your home warm by blocking cold air.

Your windows made of upvc will keep providing excellent insulation and security to your home with regular maintenance and repairs. It is important to remember that all windows will eventually become worn out, and it could be cheaper to replace them rather than repair them. If you have any problems with your upvc window it is recommended to speak with an expert immediately.