Why The Ghost Immobiliser Problems Is Beneficial During COVID-19

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions against theft by using the Ghost Immobiliser. This system is discreet & does not require any additional key fobs to operate.

The device uses buttons on your vehicle (steering wheels, door panels and centre console) to generate a unique pin code sequence that can be modified up to 20 times. This allows your vehicle to start.

Simple process to change the PIN code

Many owners are upgrading their security because of the rising number of vehicle thefts. There are a myriad of security devices that are sold aftermarket, from tracking systems to immobilisers and alarms. Not all of them are equally effective in protecting your car. A tracking system may aid in finding your vehicle in the event of it being stolen, but it will not prevent the crime. Immobilisers, in contrast perform exactly as they say on the tin: they shut down the motor of your car to prevent it from being started. The Autowatch Ghost is one of the most advanced options available, making it virtually impossible for thieves to steal your car.

The ghost device makes use of the buttons on your car to generate an unique sequence that needs to be entered in order for the engine to begin. This can be done using the indicator stalk or window buttons. In addition it is possible to use an app on mobile that can act as an emergency PIN code override and allows the driver to operate the car without using the button sequence. This is especially useful if you need to hand your car over for valet parking or maintenance since the immobiliser is active and not deactivated.

The Ghost is a truly unique and innovative device that works in conjunction with the buttons in your vehicle instead of being a separate unit. This means it's not just a powerful deterrent against vehicle theft but it can also be transferred onto any other vehicles you may own, making it more of an investment than traditional steering wheel locks.

Weatherproof small device

The Autowatch Ghost Immobiliser is a sophisticated security system that safeguards your vehicle from key cloning and hacking. It also blocks ECU swapping. It is a tiny weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus to stop the motor. It can be plugged into the vehicle without the need for extra wiring and has been extensively tested to ensure that it works with all vehicles. It is also immune to jamming devices that are a popular technique used by thieves to bypass immobilisers.

The benefit of using CAN data is that it operates silently compared to traditional systems. It's not detected by sophisticated RF scanning or code-grabbing technology and is also undetectable by traditional diagnostic tools. The Autowatch Ghost does not use LED indicators but instead utilizes buttons in your vehicle, such as the steering wheel, centre console, or doors, to create a unique disarming sequence. You can make this sequence up to 20 presses long for added security. The iPhone app is limited to one connection, and comes with an individual pairing code for the Ghost. All communication between the two devices is protected.

The Ghost also prevents car thieves from using an additional key or replacing the ECU to bypass the immobiliser and begin the engine. The engine will only run only if a valid PIN has been entered. It is also possible to put it into valet/service mode for hackersnews.org a temporary operation (with set parameters such as 30mph speed limit) to allow you to give your car to a valet service or for servicing without the need to enter a pin code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket immobiliser on the CAN bus that connects to your vehicle's existing wiring and connects to your engine control unit (ECU). The device detects signals to stop your car from starting normally until you enter a customized code. The system can be turned off or on by using your smartphone app, without the need for extra wires.

The standard factory immobilisers function by using a transponder that is embedded in the key. It transmits a message to the ECU. If the correct code is transmitted, the car will start however, if the transponder is replaced by one from a different vehicle, the immobiliser won't recognize it. This allows the vehicle to be stolen and started. The Ghost immobiliser was created by a South African company at the top of security systems for vehicles technology. It protects you from hacking or key cloning and even key theft. Only by physically towing your vehicle away could a thief get it and not be able to drive the vehicle.

Ghost makes use of the buttons on your vehicle including the indicator stalk along with the steering wheel, indicator stalk and door panels to generate a unique PIN sequence that can be changed that must be entered before you are able to use your car. This is done without the need for extra hardware such as keys-fobs, and can last up to 20 presses long. It is also undetectable by equipment for diagnostics and does transmit radio frequency signals, which means thieves are not able to use sophisticated RF scanners or code-grabbing technologies to identify that a system has been installed.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks, Ghost is covertly integrated into the vehicle so it can't be disabled or removed by thieves and is also harder to remove from a car alarm which requires disarming using an action sequence. This makes it a fantastic addition to an GPS tracking device which can be used to track your vehicle after it's been taken.

Override of emergency PIN code

You do not have to look long on social media sites to find stories or videos about cars that have been stolen using the most advanced technology tools. This includes key-cloning devices as well as hacking tools that allow them to start the vehicle with your original keys.

The Ghost immobiliser was specifically designed to prevent this, and give you an extra layer of security in order to protect your vehicle from being targeted by thieves. It creates an individual pin code push sequence from the buttons you have on the steering wheel, door panel, and the center console. The unique pin code is entered along with your original key fob to stop the engine from getting started. The unique override pin is found on a black card that you receive following the installation. It is easy to remember because there aren't any LED indicators.

The device is hidden inside the vehicle's wiring and does not emit radio signals, therefore it cannot be identified by modern thieves using diagnostic software that can detect the type of security system you have installed. This makes it a fantastic alternative to the tracking device.

Contrary to most security systems that use a relay inside the engine bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via CAN data bus (brand dependent). This enables them to shut down the vehicle completely with a digital block of commands to both the ECU and the engine.

It is also possible to connect an analogue immobiliser, alarm or tracker with these systems, but this has to be specified prior to installing the device. They also work with valet/service modes and an excellent alternative to a tracking device when you take your car into the dealer for an electrical problem.

Service/Valet mode

In recent times, there has been an increase in vehicles being stolen with the owners' keys. It is more easy than ever to steal your pride & joy thanks to the availability of key cloning devices and door lock picks. We've developed the Autowatch Ghost Immobiliser to combat this. It blocks your vehicle from being driven even if you keys have been copied.

It directly communicates with your cars ECU (Engine Control Unit) via the CAN data circuit. It's completely silent since it doesn't use radio frequency or key fobs. It can't be detected by diagnostics or any other hacking device. It also protects you from introducing the new ECU or key to bypass the system since only the PIN code allows the engine to be started.

The device is hidden inside your car using existing buttons on the steering wheel, the centre console and door panels. Before you can begin your car, madetech.co.kr you need to enter a unique and changeable PIN code that can be as long as 20 numbers.

This is the first aftermarket immobiliser CAN bus that has been developed that can prevent your car from being started or driven away in the event that a PIN code hasn't been entered prior to. If the device is activated and you attempt to drive away, it will display a warning on your dash, which will flash on a regular basis for approximately 300m, if you enter your PIN code during this time, it will disarm the anti-hijack and your car will continue to operate as normal. If you don't enter your PIN at this time the indicator will continue to flash and Bethany.Top will require a new PIN code every time you try to start your vehicle.