See What Ghost 2 Immobiliser Reviews Tricks The Celebs Are Using

Ghost 2 Immobiliser

Ghost is a wireless security system that protects your car against key-cloning and hacking. It is connected to the ECU unit via the CAN data networks. It is also silent, meaning it cannot be detected.

It is only possible to disarm it by entering the sequence of buttons (like PIN code) you have programmed into your car using buttons on the steering wheel as well as the the centre console.

Make sure you're protected from theft

Car theft is on the rise, and vehicles are taken away in a matter of seconds. It is important that car owners take into consideration the extra security measures they can adopt. Immobilisers are one of the most effective and proven ways to keep your vehicle secure. Ghost immobilisers are a good alternative because they are small, hidden within the wires of your vehicle and don't emit radio frequency signals. They are therefore untraceable and can be fitted without affecting the CAN bus system in your vehicle.

Our ghost immobiliser in your area is only deactivated by the pin code we set up at the time of installation. This unique disarming sequence utilizes buttons on your steering wheel, doors, or centre consoles to stop anyone from driving away your vehicle. This stops thieves from copying your key or using a jamming/spoofing device that can disable the standard immobilisers for cars.

Not only does a ghost immobiliser prevent your car from being driven, but it also stops the car from being taken to make parts. This is a growing issue in the UK due to the growing popularity of these cars. It can happen in minutes. Ghost immobilisers from TTW are easily programmed to guard your vehicle from these kinds of attacks.

Installing our Ghost 2 immobiliser will stop your vehicle from being stolen at a garage or service station, or even if it is being driven around the garage by an employee. This is because the Ghost can be set to Service/Valet mode and will only allow a unique button sequence to be entered by our customers.

If you'd like to know more about our ghost immobiliser review immobilisers or want to have a free quote, please contact us now. We will be happy to assist you and provide you with assurance that your vehicle is secure throughout the day.

No Key Fobs or LED Indications To Give Away Its Location

Make sure your vehicle is protected from the newest type of car theft with this non-detectable immobiliser which is integrated into your cars CAN data network. Contrary to other aftermarket CAN immobilisers, Ghost does not rely on key fobs or LED indicators to function instead it utilizes buttons on the standard factory controls already in your vehicle such as the ones on the steering wheel, door panels, and the centre console. This means that a hidden pin code is created which must be entered before the vehicle can start which makes it totally undetectable to thieves.

The CAN-BUS immobiliser developers have also added additional security methods in to prevent the device from being hacked or bypassed. It also offers CAN-BUS blocking and a physical immobiliser cut, which means that even if your keys were stolen, the burglar is unable to drive away with your joy and pride.

Installing the CAN BUS in your vehicle is a simple and quick procedure that takes just 30 minutes. We will send one of our staff in your area to schedule an appointment time and location that works for your needs. After your vehicle has been fitted, you will be given a registration number and unique security codes for your phone and the app to make it simple to use and ensure you are always in control of your car's security.

The system is compatible with a wide range of modern vehicles, however If you own a classic or special-purpose vehicle we recommend you contact us to confirm compatibility. The supply and installation price of The Ghost Immobiliser 2 is APS449 and your car will be added to the International Security Register if fitted by one of our certified fitters. If you have any questions, don't hesitate to get in touch with our helpful staff. We're looking forward to hearing from you.

Easy To Set Up And Programming

Modern cars are usually fitted with immobilisers that stop thieves from hot-wiring or taking your car. In contrast to physical deterrents like locking your steering wheel or wheel clamps, an immobiliser is hidden inside your vehicle, making it nearly impossible to find and defeat.

The system works by connecting directly to the CAN data network of your vehicle and prevents the vehicle from starting until you input a unique personalised code. The unit is sealed, and so small that it can be positioned practically anywhere in your car with no need for wiring. It also doesn't emit radio frequency signals, therefore it isn't detected by RF scanning or code grabbing equipment that is used by thieves.

ghost immobilise utilizes your vehicle's current buttons on the steering wheel as well as the door panels and central console to generate a customisable disarm sequence (like PIN codes) that must be entered in order to authorize the startup of your vehicle. The pin code sequence can be modified if needed and is based on between four and twenty button presses. You can even put the vehicle in Service/Valet Mode, so that it is still operable but it will not start or drive. This will ensure that your car is secure when you bring it in for valet parking or service, and that the mechanic is unable to access your pin code to disable your system.

You can make use of our app to create temporary pins for your autowatch ghost 2 immobiliser device if you're planning to be away from your car for a prolonged period of time like working or vacation. You can also enter your pin number manually when you want to drive the vehicle.

Our CAN bus immobiliser may also be connected to a remote key fob and tracker (Brand dependant) which will take precedence over the ghost system. This is great for extra security in the case your vehicle is stolen, or if you lose your keys.

If you're looking for a method to safeguard your vehicle from key cloning and hacking contact us now to find out how we can assist. We provide our services all over the UK as well as at our dedicated install center in Derby.

Service/Valet mode

Modern cars are equipped with sophisticated eco systems that have stop/start systems that require the proper inputs for them to work effectively. For instance batteries, voltages, engine temperatures, external temperatures and which electrical systems are in operation. Sometimes, these issues can be a cause of concern and are often difficult to determine if it is ghost immobiliser cost related or not. This is especially true if the vehicle has been recently repaired or valet-parked. You can use the ghost 2 immobiliser reviews (https://securityholes.science/) service mode that allows the vehicle to start and drive temporarily without the need for a pin. This can be useful for the time that your car immobiliser ghost is being repaired or at an independent garage.

To enter service mode simply press the button for service 5 times. The indicator light will flash twice when the service mode is selected. This can be exited at anytime by entering a PIN code. After you exited the service mode, the Ghost immobiliser will go back to normal operation.

This is a very discrete system that communicates with the vehicle ECU via the CAN data circuit. It connects directly to the original buttons of the vehicle and does not rely on radio frequency signals like other immobilisers. This makes it virtually impossible for any other device to bypass or hack - even jamming devices that spoof codes from the original key fob do not affect the system.

It is a TASSA-verified anti-theft device that complies with the highest standards of protection. It has the only marking system that is linked to the security registry of the world, which is a requirement for insurance companies.

The ghost immobiliser has a very small form factor and is easily hidden in your vehicles factory wiring which makes it nearly impossible for thieves to locate. The sealed unit is so small that it can be mounted in various places of the car, including under dashboards or on the steering wheels.

The system makes use of the existing buttons within your vehicle (such as those on your steering wheel or door panels, or on your central console) to enable you to create an individual and programmable disarm sequence of up to 20 press long. It must be completed before your vehicle starts. It can be entered by anyone with your unique pin code - it's secure and safe for you and your family members, colleagues, or friends to use.