Think You're Perfect For Repairs To Upvc Windows? Take This Quiz

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not rot or rust like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, making it very hazardous and possibly fatal. You should take the time to make sure that your windows are in good working order.

Single-pane windows are relatively simple to replace, and they will usually fit into the frames of the past easily. If windows with double glazed window repairs panes are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this case it is essential to buy plastic spacers to help the new pane fit into the window frame.

If you're planning to attempt to remove the window panes by yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor which could cause them to be trampled.

Once the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional can come out and fix the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the gap is particularly large, you might be interested in a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. Over time, they can develop a variety of issues, including sagging. A sagging uPVC window can cause issues with light, draughts and even security. If you find that your upvc window repairs near me window is beginning to shrink, it's important to act quickly to prevent the problem from worsening.

Repositioning the hinges could help fix a window that is sagging. First, you'll need to open the windows to get at the frame. Then, using the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they stay in the right place.

If you are unable to reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes them to lose tightness. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. Often, this is caused by screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close the window and then perform a test fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home, and impact your ability to regulate the temperature of your home. The most common reason for leaking uPVC windows is that the sealant around the frame is damaged or not present.

This is a simple fix that can be accomplished by any DIYer who is competent. Based on the severity of the problem the caulking that was used up may need to be removed before a fresh layer can be put on. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and can reduce your energy efficiency.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is more related to the seal, not the frame. Again this can easily be fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open in a breeze It could be hinges at fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that are hinged and like any mechanical part they will wear out over time. It is essentially a simple process, but it's simpler when you have a person to help hold the frame up.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused either due to opening the window in the wrong way or a faulty installation in the factory. Sending us a picture via our website is often enough to solve the issue. We are always happy to provide advice.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant on the hinges is a great method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It can also reduce the chance of windows sticking and prevent corrosion. It is recommended to perform this every year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. Firstly the hinges, again because of wear and tear, could become misaligned. This causes gaps to develop where the sash meets the frame. This can be easily fixed by giving them a good cleaning, but when they're beyond repair, it might be necessary to have them re-aligned or replaced. The interlock, which is located on the hinge side of the window and can also become misaligned, window repairs again it is feasible to give them a clean but in some instances it could be necessary to have these replaced.

These seals can wear down or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and again will lessen draughts.

One of the most effective methods to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric which are filled with a sort of filler and can be placed on the windowsill on top. These will help to stop cold air from entering and keep your home warm and cozy!

With a little maintenance and window repairs repair windows made of upvc will continue to provide excellent security and insulation for your home. It is essential to remember that all windows will eventually become worn out, and it is more cost-effective to replace them than to repair them. So, if you're experiencing issues with your Upvc windows, it's best to seek professional assistance as soon as possible.