Five Autowatch Ghost Immobiliser Fitting Projects To Use For Any Budget

Ghost Immobiliser Installation

Add a ghost immobiliser to your car to safeguard it from thieves. Our TASSA confirmed system safeguards vehicles from hacking, key cloning, and vehicle immobiliser bypass.

The system is hidden in the wiring loom of your vehicle It is inaccessible to anyone looking. It operates by creating a pin code push sequence through buttons already on the steering wheel doors, door cards, and the central console.

No circuit cuts

A car is a precious item that takes years of hard work to get, which is why owners want to protect their vehicle from theft. Traditional security systems, such as alarms or wheel locks can be easily bypassed by thieves. A ghost immobiliser is a highly-effective solution that operates silently and isn't detected by modern thieves.

A ghost immobiliser or a hidden device is a device that communicates to your vehicle's data network CAN to shut off the engine. It does this without using radio frequencies or key fobs. It communicates with the ECU of your vehicle via buttons on the steering wheel, dash and door panels. This generates an individual pincode that is only accessible to you. The code can be changed at any time and Autowatch Ghost Immobiliser Fitting can have up to 20 digits depending on your preference. It also includes a secure emergency code that you can use if you forget your PIN.

The ghost immobiliser could also be used to prevent relay boxes from transmitting your car key's signal from inside your home, which will unlock the doors and then start the vehicle. It could even block advanced methods of stealing your vehicle, such as OBD port hacking. The device is small, weatherproof and difficult to detect. It's also difficult to alter.

Another advantage of the ghost immobiliser is that it can be installed to your vehicle without permanent marks. This makes it ideal for those who intend to resell their car in the near future. It's also a lot faster and easier to install than a factory-fitted system.

The Autowatch Ghost, a cutting-edge new generation device, stops thefts from cars that are not connected to a vehicle's CAN network and using the existing buttons to generate an unique PIN code. This is a stealthy system that can be put in place without cutting any wires and does not require any additional key fobs. It can also be connected to the original ECU of the vehicle, thus preventing thieves from using a different key. This system is TASSA certified and is linked to an International Security Register, allowing owners peace of mind knowing that their vehicles are protected against theft.

No scanning with RF

You will want to protect your vehicle from theft if you have spent an enormous amount of money and effort to customize it. One of the best ways to accomplish this is to install an immobiliser, which will stop your engine from running until you enter a unique PIN code. You can create a 20-digit PIN using the buttons on your dashboard or steering wheel. This will ensure that only you are allowed to drive your vehicle. It is also possible to create a service and valet mode, which will allow you to start your car temporarily without entering the PIN code. This will allow your technician to work on your vehicle without you being there. This feature is great for people who want to cut down on time and make their lives easier.

Ghost immobilisers are new generation device that connects to your vehicle's CAN data network, and uses the buttons on the dashboard and steering wheel to programme a personalised PIN code. It is designed to blend into with the rest of your vehicle, since it doesn't emit any sound or light indicator. It can be installed anywhere on your vehicle without impacting the appearance of your vehicle.

This stealthy system has been approved by TASSA and could lower your insurance costs. It also comes with the ability to track, autowatch ghost immobiliser fitting which can locate your vehicle even if it has been stolen. This is particularly useful if have a costly or rare vehicle that you have invested many hours personalising.

The Autowatch Ghost can be used in conjunction with an iPhone application to allow you to remotely start your vehicle in the event you forget your PIN or are unable to get into the vehicle due to a reason. This feature is ideal for those who need to do some errands, or drop off your kids and do not want to let someone else drive your vehicle. This feature is helpful in the event that you need to bring your car in to be repaired or serviced.

Another advantage of the Ghost is that it doesn't transmit or detect radio frequency signals, making it undetectable to thieves who employ RF scanning or code technology to capture codes. It also has the ability to protect your car against key cloning and ECU swapping which are the most common methods of car theft.

No key cloning

Ghost immobilisers can be an excellent method to protect top-end vehicles and stop key copying. They prevent your car ghost immobiliser from starting unless an additional PIN code is entered alongside the standard key fob. This makes it more difficult for thieves to steal the vehicle, and could stop them from trying. This is a particularly good idea if you have invested an enormous amount of time and money in customizing your vehicle, or own a rare or expensive model.

These immobilisers are linked to the vehicle's CAN data network onboard and are completely hidden, which means that their presence isn't obvious. The device is also difficult to identify using radio frequency scanning technology or code grabbing. This means that a burglar would have to spend more time to steal your vehicle.

To bypass the system thieves must know the unique pin code and the location of the Ghost. The pin code is unique to you and you can alter it as many times as you need to. The pin code is simple for you to remember but mathematically impossible for anyone else to figure out. In addition, the engineer will have provided you with an emergency PIN code that can be used to bypass the pin in case you ever forget the pin.

The Ghost CAN Bus immobiliser is able to be installed in a matter of minutes on your vehicle. It is compatible with any vehicle and can be completely customized to match your car's look. It is also affordable and easy to use. You can even transfer the device to a different vehicle if you switch cars during the lifetime of ownership, provided that the new vehicle is compatible with it.

The immobiliser for the CAN bus is compatible with a variety of other security features. For instance, it could detect the damage to your vehicle and alert the owner. It will also shut off the engine if it detects that the car has been damaged. The system will protect your vehicle from hacking and key duplication. It also detects vibrations or contact with the vehicle. In addition, it could notify the owner that the vehicle has been moved.

No OBD port hacking

Ghost uses a hidden module that is connected to the CAN data network of your vehicle. This prevents a thief trying to hack into your vehicle to disable your alarm, turn off your key fob and code new keys. This technology is an improvement over the traditional methods employed by thieves to steal vehicles in the past. The CAN data network also means that the system won't be affected by disconnecting or changing your battery.

The autowatch ghost immobiliser Ghost is the world's first aftermarket CAN bus that is a non-detectable immobiliser that safeguards against key-cloning, hacking, and theft of replica cars. It doesn't use LED indicators or key fobs. Instead, it utilizes the buttons on your steering wheel, console and door panels.

Modern thieves use diagnostics to detect circuit breakages in your vehicle. They can bypass immobilisers which require a lot of wiring or are integrated into the wiring. The Ghost is weatherproof and doesn't require any additional wiring. It is not identified by diagnostic tools that are professional. It can be even installed on vehicles that are fitted with anti-theft systems.

Another benefit of a Ghost immobiliser is that your vehicle can only be started by someone who has access to the PIN number and has physical access to your vehicle. This is a big benefit over traditional security systems that can be tampered with using simple cable tampering, a screwdriver or the utilisation of a universal remote controller.

You can easily reset your PIN if forget it by using the emergency PIN override feature on a computer or mobile phone. This is useful if you need to start your car after it's in a garage or the valet parking service.

The autowatch ghost immobiliser fitting Ghost 2 is the latest generation of the product and is affixed to insurance by TASSA when installed by one of our authorised installers. It comes with a QR fingerprint system to identify specific parts, which allows for the return of stolen items in the event that they are discovered. It can also be set to'service mode', which allows the engine to be started when your car is in a garage or if you have valet parking, however, you'll need to enter your PIN code once more to exit the car.