See What Ghost Immobiliser Problems Tricks The Celebs Are Using

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft with the Ghost Immobiliser. It is discreet and does not require any additional key fobs.

The device uses buttons on your vehicle (steering wheels, door panels and centre console) to generate a unique pin code sequence that can be changed up to 20 times. This will then authorize the start-up of your vehicle.

Simple PIN code Change Process

Many owners are upgrading their security due to the rising number of vehicle thefts. There are a variety of security products that are available from tracking systems to alarms and immobilisers. Not all of them are equally effective at protecting your vehicle. A tracking system may assist you in locating your car if it is stolen however, it won't prevent the crime. Immobilisers, on the other hand, does exactly what it says on the tin: it shuts down the engine of your vehicle so that it cannot be started. The Autowatch Ghost is one of the most sophisticated options available, making it nearly impossible for thieves steal your car.

Using the existing buttons in your car, the Ghost Immobiliser Problems device creates an exclusive sequence that has to be entered prior to the engine will start. This can be accomplished by using the heater, window or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their car without having to use the button sequence. This feature is particularly beneficial if you have to hand your car over to a valet service or parking since the immobiliser will still be activated and not disabled.

The Ghost is an innovative and unique device that operates with your vehicle's buttons rather than as a standalone device. This means it's not just a powerful protection against theft of your vehicle, but it can also be transferred onto any other vehicles you may own, making it much more valuable than the traditional lock on your steering wheel.

Small device that is weatherproof

The Autowatch ghost immobiliser is an advanced security system that guards your vehicle from key cloning, hacking & ECU swapping. It is a tiny weatherproof device that connects with the ECU of your vehicle directly via the CAN bus, causing it to shut down the motor. It can be fitted into the vehicle without additional wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant against jamming devices which are a typical technique used by thieves to circumvent immobilisers.

The advantage of CAN data over traditional systems is that they operate in a silent manner. It isn't detected by sophisticated RF scanning or code-grabbing technology and is also undetectable by traditional diagnostic tools. The Autowatch Ghost doesn't use LED indicators and instead uses buttons in your vehicle, such as the steering wheel, centre console, or door panels, to create an unique sequence of disarming. You can make this sequence as long as 20 presses to provide additional security. The iPhone app allows a single, Ghost Immobiliser Problems authorised connection, with a pairing code that is unique to the Ghost and communication between the two devices is encrypted.

The Ghost also stops car thieves from using a new key or replacing the ECU to bypass the immobiliser and start the engine. The engine can only be started only if a valid PIN has been entered. It is able to be operated temporarily in the Valet/Service mode (with parameters set, such as a 30mph speed limit), so you can offer your vehicle to an attendant or valet without needing to enter an entry code.

Each vehicle is tested

The Autowatch Ghost is a world-first aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device detects signals to stop your car from starting normally until you enter a specific code. The system can be activated or deactivated through your smartphone's app without the need for extra wires.

The standard factory immobilisers function by using a transponder, which is built into the key. This sends a message to the ECU. If the correct code is sent, the car will start however if the transponder is replaced by one from another vehicle the immobiliser will not recognise it. This allows the vehicle to be started and stolen. A South African company that is at the forefront of vehicle safety systems technology developed the Ghost immobiliser. It protects you from hacking or key cloning, and even key theft. Only by physically towing your vehicle away from thieves could they take it away and not be able drive it.

Ghost utilizes the buttons of your vehicle including the indicator stalk, steering wheel and door panels to create an individual PIN code that is changeable that must be entered prior to you can drive. This is done without the need for additional hardware like a key-fob and can be as long as 20 presses long. It is also undetectable to diagnostics equipment and does not transmit radio frequency signals, so thieves cannot use sophisticated RF scanning or code grabbing technology to detect that the security system has been installed.

Contrary to physical anti-theft devices such as clamps or wheel locks, Ghost is hidden within the vehicle, so it cannot be removed or disabled by thieves and is also harder to remove than a car alarm, which requires disarming via the use of a button sequence. This makes it an excellent alternative to an GPS tracking device that can be used to locate your vehicle after it's stolen.

Override of emergency PIN code

You don't have to look far on social media to find stories or videos about cars that were stolen using the latest technology tools. Key-cloning devices, for instance, and hacking tools that allow thieves to start the vehicle with your original keys.

Our Ghost immobiliser combats this and gives you an additional layer of protection to stop your vehicle from being stolen if it is targeted by thieves. It creates an unique pin code push sequence from your existing buttons on the steering wheel, door panel, and the centre console. The unique pin code must be entered along with your original key fob in order to stop the vehicle from starting. The unique PIN for override is on the black card you will receive following your installation. It is simple to remember since there aren't any LEDs.

The device is hidden within the vehicle's wires, and doesn't emit any radio signals, which means it isn't able to be identified by modern thieves with diagnostic software that can recognise what type of security system you have installed. This makes it a great alternative to a tracker.

Contrary to other security systems that rely on a relay located in the engine bays, CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the car. This enables them to shut down the vehicle completely through the use of a digital block of commands that is sent to both the ECU and the engine.

It is also possible to connect a separate analog immobiliser, alarm or tracker with these systems but this must be specified prior to installing the device. They are also fully service/valet mode compatible and a good alternative to a tracker if you are having your car in for repairs to an electrical issue at the dealership.

Service/Valet Mode

In recent years there has been an increase in vehicles being stolen from owners without keys. With the ease of access to key cloning tools and door lock pick sets, it is now easier than ever for thieves to take your prized possessions. We have developed the Autowatch Ghost 2 immobiliser Immobiliser to combat this. It stops your car from being driven, even if your keys have been cloned.

It connects directly to your car's ECU (Engine Control Unit) via the CAN data circuit. It's completely quiet since it doesn't use radio frequency or a key fob. This means it cannot be detected by diagnostics or other car hacking devices. It also protects against adding a new key or replacing the ECU to get around the system since only the correct PIN code will allow the engine to start.

The device is concealed inside your car, using buttons on the steering wheel, centre console & door panels. Before you can start your car, you must enter a unique, changeable PIN code that can be as long as 20 digits.

This is the very first aftermarket CAN-bus immobiliser that has been designed. It can prevent your vehicle from being driven or started when you don't enter a PIN code before entering. If the device is in armed and you try to drive away, it will display an indication on your dash which will flash regularly for Ghost Immobiliser Problems around 300m. If you type in your PIN code at this point, it will disarm the anti-hijack system and your vehicle will continue to drive just as normal. If you do not enter your PIN at this time the indication will continue to flash and require a new PIN code for every attempt to start your car.