See What Ghost Immobiliser Problems Tricks The Celebs Are Making Use Of

Protect Your Pride And ghost immobiliser Joy With The Ghost Immobiliser

Protect your pride & joy against theft with the Ghost Immobiliser. This system is discreet & does not require any additional key fobs to operate.

The device uses buttons on your vehicle (steering wheels doors, door panels, and the centre console) to create a unique pin code sequence that can be modified up to 20 times. This will then authorize the startup of your vehicle.

Simple PIN code change process

Many homeowners are upgrading their security due to the rise in vehicle theft. There are a variety of security devices that are sold aftermarket from tracking systems to immobilisers and alarms. However there are a few that are equally efficient in protecting your vehicle. A tracking system can assist you in locating your car if it is stolen however, it won't prevent the crime. An immobiliser, on the contrary does exactly what it says on the label: Ghost immobiliser it shuts off the engine of your car so that it cannot be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it nearly impossible for thieves to take your vehicle.

The ghost device makes use of the buttons on your car to create a unique sequence that must be entered in order for the engine to begin. This can be done by using the heater, window or indicator stalk buttons. Additionally, there is also a mobile app which can act as an emergency PIN code override and allows the driver to operate the car without having to use the button sequence. This is an excellent option for those who want to offer your car to valet parking or for maintenance. The immobiliser will stay in operation.

The Ghost is a unique and innovative device that is used in conjunction with the buttons on your vehicle rather than as a separate device. This means that it is not just a powerful protection against theft of your vehicle, but it can also be transferred to any future vehicles you may have, making it more valuable than traditional steering wheel locks.

Small device that is weatherproof

The Autowatch ghost immobiliser is a high-tech security device that protects your pride and joy against key cloning, hacking & ECU swapping. It's a weatherproof, tiny device that connects directly to your vehicle's ECU via the CAN data bus to shut down the engine. It can be installed in the vehicle without the need for additional wiring, and has been thoroughly tested to ensure it is compatible with all vehicles. It is also resistant against jamming devices, which are a common technique that car thieves use to bypass immobilisers.

The advantage of CAN data over traditional systems is that they operate silently. It's not detected by sophisticated RF scanning or code-grabbing technologies and is also undetectable by traditional diagnostic tools. The Autowatch Ghost does not use LED indicators, but instead uses buttons on your vehicle, such as the steering wheel, centre console or door panels, to create a unique disarming sequence. This sequence can be extended 20 presses to provide additional security. The iPhone app is limited to one connection, with an individual pairing code for the Ghost. All communication between the two devices is protected.

The Ghost will stop car thieves from putting in a new ignition key or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to start only if the correct pin code is entered. It is able to be operated temporarily in valet or service mode (with parameters set, such as a 30mph speed limit) and, therefore, you can hand your car to valet or service without needing to enter the code.

Every vehicle is tested

The Autowatch Ghost is a world-first aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device intercepts signals to stop your car from starting up normally until you enter a specific code. The system can be activated and deactivated by using your smartphone's application without the need for additional wires.

Standard factory immobilisers in vehicles function by using an electronic transponder in the key that sends an electronic signal to the ECU. If the correct code is sent the car will begin however if the transponder is replaced by one from another vehicle the immobiliser cannot recognize it. This allows the vehicle to be started and stolen. The Ghost immobiliser was developed by an South African company at the forefront of vehicle security systems technology. It protects you from hacking or key cloning and even key theft. Only by physically towing your car away could a thief steal it and not be able to drive it.

ghost immobiliser birmingham uses the buttons in your vehicle including the indicator stalk as well as the steering wheel and door panels to generate an unique PIN sequence that can be changed that must be entered prior to you can drive. This is not required to use additional hardware like a key-fob and can last up to 20 presses long. It is also undetectable to diagnostic equipment and doesn't transmit radio frequency signals, so thieves are not able to use sophisticated RF scanning or code grabbing techniques to discover that security systems have been installed.

Ghost is more difficult to get rid of than car alarms that require disarming by pressing a series of buttons. This makes it a fantastic complement to an GPS tracking device, which can be used to track your vehicle after it's stolen.

Override of emergency PIN code

You do not have to go far on social media to see stories or even videos of vehicles that have been taken by car thieves using the most advanced technology tools available to them. Key-cloning devices, for instance, and hacking tools that allow thieves to start the vehicle without your original keys.

Our Ghost immobiliser combats this issue and offers an additional layer of protection to stop your vehicle from being taken in the event of being targeted by thieves. It works by creating an unique pin code push sequence using the buttons you have on the steering wheel, door panel and the center console. The unique pin code is entered alongside your original key fob to prevent the engine from beginning. The unique override pin can be located on a black card that you will receive after your installation. It is easy to remember because there aren't any LED indicators.

The device is hidden in the vehicle's wiring and doesn't emit radio signals. Therefore, it cannot be detected by diagnostic software that can tell the security system you have installed. This makes it an excellent alternative to a tracker.

Contrary to most security systems, which have a relay in the engine bay, CANBUS Immobilisers communicate with the car's ECU and BCM via CAN data bus (brand dependent). This enables them to shut down the vehicle completely by sending the use of a digital block of commands to both the ECU and the engine.

It is also possible to connect a separate analog immobiliser, alarm or tracker to these systems but this must be stated prior to the installation of the device. They are also service/valet mode-compatible and a great alternative to a tracker if you are you have your car checked for repairs to an electrical issue at the dealer.

Service/Valet Mode

In recent years there has seen an increase in the number of cars being stolen with the owners' keys. It is easier than ever before to steal your pride and joy with the availability of key cloning devices and door lock picks. To combat this we are now offering the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys have been cloned or your vehicle has been hijacked.

It directly communicates with your car's ECU (Engine Control Unit) through the CAN data loop. It's completely silent since it doesn't use radio frequency or keys fobs. It isn't detected by diagnostics or any other hacking device. It also shields against the possibility of adding a new key or replacing the ECU to get around the system since only the correct PIN code can allow the engine to start.

The device is hidden inside your car using existing buttons on the steering wheel, the centre console and door panels. Before you can begin your vehicle, you must enter a unique, changeable PIN number that is up to 20 numbers.

This is the very first aftermarket CAN-bus immobiliser that was developed. It can prevent your vehicle from being driven or even started in the event that you do not enter a PIN code before entering. If the device is activated and you attempt to drive away, it will display an indication on your dash, which will flash continuously for about 300m. If you enter your PIN code at this point it will disarm the anti-hijack and your car will continue to drive in the normal way. If you do not enter your PIN at this point, the warning will keep flashing & will require a new PIN code for every attempt to start your car.