10 Wrong Answers To Common Repairs To Upvc Windows Questions Do You Know Which Ones?

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to decay or rust as aluminum and timber.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and may even be fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and typically fit into frames of the past easily. If windows with double panes are joined by internal beading, it will be more difficult to remove and replace the old panes. In this situation you'll need to locate some plastic spacers that will aid the new pane in being able to fit perfectly into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. It is also a good idea to lay down a dropcloth before you start working on the glass, so that any shards will fall onto the cloth instead of onto the floor where they can be trampled upon and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to stop water and drafts from entering the property until a professional comes out and repair the window. This will also act as a barrier, Upvc Window Repairs deterring any intruders from gaining entry into your home. If the distance between the window and the door is significant, you may need to consider a security screen that also has windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. However, over time they can suffer from a variety of issues, including sliding. A sagging uPVC windows can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll need to open the window to get to the frame. After that, using an screwdriver, remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, shut your window and test it for an appropriate fit. If you are happy with the fit of the window, tighten the screws to hold them in the right position.

If you are unable to reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes them to lose tightness. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and draught-proof.

uPVC handles may also become loose. This is typically caused by screws that have loosened over time, but it could be due to the mechanism of the handle getting worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need to shut the window and perform an initial fitting. The joint at the corner of the sash should align with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it is important that you take action. Water leaks from windows are not just a cause for degrading of the structure of your home but also hamper your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix that can be done by any skilled DIYer. Based on the severity of the issue the caulking that was used up may require removal before a new layer is applied. It is crucial to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk and then make the area harder to clean and can reduce your energy efficiency.

Check that any drainage holes do not have debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more serious instances, you may need to think about replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

It is also important to remember that if the leakage originates from the glass in your double glazed window repairs glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. This can be easily repaired by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with a breeze, it may be hinges at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that have hinges and like any mechanical part they are susceptible to wear and tear over time. It is an easy process, but it's easier to do when you have a person to help you hold the frame up.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused due to opening the window in the wrong way or due to a poor installation in the factory. Sending us a picture through our website can often solve the issue. We are more than happy to offer assistance.

It is also important to grease the hinges on a regular basis. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also stop corrosion and reduce the risk of sticking. The ideal time to do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. Firstly the hinges, again because of wear and tear, could become misaligned. This causes a gap to form where the sash joins the frame. They can be fixed by giving them a good cleaning, but if they are beyond repair it may be necessary to have them re-aligned or replaced. The interlock may also become disaligned. This happens on the hinge's side and might require to be cleaned. In some instances, it may be necessary to replace these.

The next common reason for draughts are the window seals. These are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. Replacement of these with high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures and again will reduce the risk of draughts.

Another, and most effective ways to cut down on drafts is to use an draught excluder. These are usually fabric tubes which are filled with a sort of filler and can be positioned on the windowsill on top. They can keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs windows made of upvc will provide excellent security and insulation for your home. It is crucial to realize that all windows have a lifespan and eventually, they will reach a point where it is more efficient to replace them than fix them. If you are experiencing issues with your upvc window you should consult an expert as soon as you can.