5 Common Phrases About Repairs To Upvc Windows You Should Stay Clear Of

Repairs to upvc window repairs near me Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not rust or rot.

It is crucial to wash and oil UPVC windows and doors regularly. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. You should take the time to ensure that your windows are in good working order.

Single-pane windows are fairly simple to replace and typically fit into frames of the past easily. If you have double-paned windows which are joined by internal beading, it will be difficult to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you are going to attempt to remove the glass panes yourself, it is essential to wear the proper safety gear, including thick gloves and eye protection. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any shards will fall on the fabric instead of onto the floor where they could be trampled upon and cause further damage.

Once the glass is removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to stop water and drafts from entering the home until a professional comes out and repair the window. This will also act as a barrier, preventing any intruders from gaining entry to your home. If the distance between the door and the window is large, you might prefer a security screen that also includes windows. This will provide the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can develop a number of problems that include sliding. A sagging uPVC windows can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from worsening.

Repositioning the hinges can aid in fixing a window that is sliding. To accomplish this, you'll need open the window so that you can access the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after you've moved your hinges. If you're happy with the fit, you can tighten the screws until they stay in place.

If you cannot reposition the hinges, you may have to replace the seal. As time passes, rubber seals lose their elasticity and become dry which causes their tightness to decrease. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows remain watertight and draught-proof.

UPVC handles can also become loose. Often, this is caused by screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need close the window and then perform an experiment fit. The corner joints of the sash must be aligned with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

It is crucial to take action if you awake each day to find mouldy walls and wet floors. Windows that leak water do are not just a cause for degradation of your home's structure but also hamper your efforts to regulate the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on the severity of the issue is, old caulking may need to be removed. It is crucial to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and can decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotted sills are also signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the issue is more with the seal rather than the frame. Again this can easily be repaired by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open with a breeze it could be hinges that are at fault. These are easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Like all mechanical parts hinges will wear out over time. Changing a window hinge is essentially a very simple process but it can be simpler when you have a person to assist in holding the frame up.

Make sure that the uPVC hinges are closed and open in the proper direction. You can check this by checking for the arrows on each hinge. This indicates which way the window should be opened.

The issue can be caused either by opening the window improperly or a faulty installation in the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be more than happy to give you advice.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant on the hinges is a great way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the risk of a window sticking and help prevent corrosion. The ideal time to perform this every year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges can also be disaligned as a result of wear, creating a gap where the sash and frame meet. If they are beyond repair, it may be necessary to get them re-aligned. The interlock may also become unbalanced. This is located on the hinge side and may need to be cleaned. In certain instances it is possible to replace these.

The second most frequent cause of draughts is the window seals. They are prone to wear or damaged over time and will allow air to escape through the gaps. Installing high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures and decrease the risk of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. These will keep your home warm by blocking cold air.

The windows made of upvc can continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. It is crucial to recognise that all windows have a life span and there may come the point when it's more cost-effective to replace them rather than repair them. If you encounter any issues with your Upvc window it is recommended to speak with a professional as soon as you can.