15 Gifts For The Repairs To Upvc Windows Lover In Your Life

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they don't get rusty or decay.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and even be fatal. It is important to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace windows, and the new one will usually fit inside the frame of the previous one easily. However, if windows with double panes are anchored by internal beading, it will be more difficult to get rid of the existing panes and install new ones. In this case you'll need locate some plastic spacers to help the new pane to fit properly into the frame of the window.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric, not onto the floor and could be trampled.

It's a great idea cover the gap with tape after the glass is removed. This will stop drafts and water from getting into your property until a professional is able to fix the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap between the window and the door is significant, you may want to use an alarm system that includes a window. This will give you the best of both.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. In time, they could develop a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from becoming worse.

Repositioning the hinges can aid in fixing a window which is sliding. You'll first need to open the windows so you can access the frame. Then, remove both the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you're happy with the fit, you can tighten the screws until they stay in position.

If you are unable to reposition the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to loosen. If this happens, it's important to replace the seal as soon as possible to ensure your uPVC windows remain watertight and safe from drafts.

UPVC handles can also become loose. This is often caused by screws that have become undone over time, but it can also be caused by the handle mechanism wears out. It's relatively simple to fix a loose uPVC hand. First, you'll need to shut the window and do a test fitting. The corner joints of the sash should be aligned with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who is competent. Depending on the severity of the problem is, the old caulking may have to be removed. It is important to remember that when it is about uPVC window repairs, do not be tempted to apply too much caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely the issue is more with the seal rather than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open with ease it could be hinges at fault. They can be repaired by any skilled DIYer and can be completed in a matter of minutes.

Like any mechanical component hinges will wear out over time. It's very simple to change the hinges on a window however it is easier if someone else helps you to hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. This can be done by checking for the arrows on each hinge, this indicates the direction in which the window should open.

Faulty window hinges could be the result of incorrectly opening the window repairs in a certain manner or because of improper installation in the factory. Sending us a picture via our website will often resolve the problem. We are more than happy to provide assistance.

Regular lubrication of hinges is also essential. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also decreases the risk of a window sticking and prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. Firstly the hinges, again because of wear and tear, may become displaced, which causes gaps to develop where the sash meets the frame. This can be easily repaired by giving them good cleaning, but when they're beyond repair, it could be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge of the window, may also become misaligned, again it is possible to give them a thorough clean, however in some instances it could be necessary to have these replaced.

The second most frequent cause of draughts is the window seals, these are prone to wear or damaged over time, and let air escape through these gaps. Replacing these with high-quality weatherstripping is a good way to stop draughts. Replace the upvc windows with low-emissivity glass. This will help control indoor temperatures, and reduce draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. These will keep your home warm by blocking cold air.

With a little maintenance and repair windows made of upvc window repairs will provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually wear out and it is more cost-effective to replace them than to repair them. So, if you are experiencing problems with your upvc windows, it is recommended to seek assistance from a professional immediately.