Repairs To Upvc Windows: 11 Thing You're Not Doing

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is important to make sure that your windows are in good condition.

Single-pane windows are relatively simple to replace, and they typically fit into frames that were previously in use very easily. However If you have double-pane windows that are held in place by internal beading, it will be more difficult to remove the existing panes and install new ones. In this situation you'll need to locate some plastic spacers to aid the new pane in being able to fit properly into the window frame.

If you are going to try to remove the glass panes yourself it is crucial to wear appropriate safety gear such as gloves that are thick and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric and not on the floor which could cause them to be trampled under.

It's a great idea seal the gap after the glass has been removed. This will stop drafts and water from entering your property until a professional is able to repair the window. This also serves as an obstruction to prevent criminals from getting into your home. If the gap is large, you may be interested in a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time, they may be afflicted by a variety of issues, including sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It is crucial to act as soon as you discover that your uPVC windows are sagging.

Repositioning the hinges can aid in fixing a window which is sliding. You'll first need to open the windows to reach the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window repairs to test the fit after you've relocated your hinges. If you are happy with the fit of the window, tighten the screws to keep them in place.

If you are unable to move the hinges, you might have to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause them to loosen. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are watertight and safe from drafts.

uPVC handles could also loosen. This is usually due to screws that have been removed over time, but it could also be caused by the handle mechanism wearing out. It's fairly simple to fix a loose uPVC hand. First, you'll need to shut the window and then perform a test fitting. The corners of the sash should align with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature of your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is damaged or is missing.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Based on the severity of the problem the old caulking may require removal before a new layer of caulk can be applied. When it is time to uPVC repair, you must avoid 'over-caulking'. This can make your window more difficult to clean and reduce its energy efficiency.

Make sure that the drainage holes have no debris in them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to remember that if the leak originates from the glass in your double glazed window Repairs near me glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open in a breeze It could be the hinges that are at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical part hinges will be damaged over time. The process of replacing a hinge on a window is essentially a simple process, but it's simpler if you have someone to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. You can do this by checking for the arrows on each hinge, this shows which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain way or due to inadequate installation at the factory. Sending us photos through our website can often solve the issue. We are happy to offer assistance.

Regularly lubricating hinges is also essential. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It can also prevent corrosion and decrease the chance of sticking. The ideal time to perform this every year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different factors. First, the hinges due to wear and tear may become displaced, which will cause an opening to appear where the sash joins the frame. If they're beyond repair, it may be necessary to have them realigned. The interlock, which is on the hinge side of the window, can also be misaligned, and again it is possible to give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The next common cause of draughts is the window seals, these are prone to wear or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures and lessen the possibility of draughts.

Lastly, one of the most effective ways to cut down on drafts is to use an draught excluder. These are typically fabric tubes which are filled with a sort of filler and can be put on the windowsill on top. They will keep your home warm by blocking cold air.

With a little regular maintenance and repair windows made of upvc will continue to provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows eventually wear out and it may be cheaper to replace them than to repair them. If you have any problems with your window made of upvc you should consult a professional as soon as you can.