Bio-Fire Explained In Less Than 140 Characters

bio ethanol fuel fire-Fires - An Eco-Friendly Alternative to Real Fires

Biofires are a warm and cosy form of heat with no harmful gases or soot. They are simple to set up and operate - just like an electric fire.

The BARDA contract will support the development of the BioFire emerging CoV panel, a nucleic-acid amplification test to be used in conjunction with BioFire filmArray Systems for the detection of known and emerging human acoronaviruses using nasopharyngeal or swabs as well as saliva samples.

Eco-friendly

A bioethanol fire can be an excellent alternative to gas or wood fires. The fuel is made from plant by-products, and employs a natural process to convert sugars into alcohol. It is a better choice over other fireplaces as it doesn't emit harmful emissions and has less carbon footprint. Bioethanol is also a safer alternative to other types of fires since it doesn't create soot or smoke. It also requires no flue, which means it can be placed anywhere in your home or garden.

Multi-drug resistant bacteria (MDR) are one of the most dangerous health threats of today. Fortunately, new testing methods can aid in identifying MDR bacteria and other infections early to avoid further complications. BioFire FilmArray is one of these tests. This test uses a symptom-driven approach to detect the most frequent pathogens that cause sepsis. The results are available in an hour so that doctors can begin treatment immediately.

The Molecular PCR process amplifies DNA and RNA molecules to millions or billions of copies. This allows you to test small amounts of body fluid or tissue for the presence of specific genetic sequences. It is a useful instrument for lab professionals and can assist them to diagnose serious diseases in a cost-effective and efficient manner. The BioFire film array PCR system is an innovative instrument for the diagnosis of infectious diseases. It can be used in various environments, including hospitals and laboratories.

In the case of respiratory tests it is possible to use a simple swab to be applied to your nose and sent to the lab to be analyzed. BioFire's system provides a fast turnaround time and allows clinicians to respond quickly. This means that patients will enjoy better outcomes and spend less time waiting for the results.

The Chanouf Farm Biofire company has developed an agroforestry recycling system which makes use of olive and pear waste to produce organic charcoal and biomass power. The products are offered to the general public to replace traditional coal briquettes and wood charcoal with green alternatives. Bio-waste products are suitable to be burned in a Kachelofen fire that produces radiant heat and is a more sustainable alternative to electric or gas fires.

Clean burning

With a bio-fire you don't just conserve energy, but also aid the environment. This is because the burning of bioethanol does not produce harmful gases such as carbon dioxide. Instead, it releases only heat and water vapour. This makes it a safer and cleaner option for indoor use.

Ethanol is a byproduct of the fermentation of sugars in plants and is classed as an energy source that is renewable. It is produced in a short time, and it will not be depleted like fossil fuels such as coal and oil. Bioethanol can also help reduce dependence on imports from abroad and reduces the risk associated with shortages in supply.

Bio-fires are very easy to install and can be utilized in existing fireplaces or as an independent unit. This makes them a convenient alternative to gas and wood bio-fuel fires. They are a great choice for offices and homes which do not have chimneys.

When a bio fire is lit, a special media is created inside the burner to absorb the liquid fuel ethanol while making it ready to burn. The ethanol fuel is burned in the flames, and the smoke are released into the atmosphere via the vent. This gives the flames a more natural appearance and a captivating beauty that can't be matched by wood or gas fires.

Another advantage of bio-fires is that they don't need vents or flues to replenish the oxygen consumed during combustion. They don't emit carbon monoxide which is released into the room when gas fireplaces are open-fronted.

The BioFire Respiratory Panel utilizes multiplex PCR technology to simultaneously test for 19 respiratory pathogens within an hour. This enables doctors to identify and eliminate respiratory diseases much faster than they can through standard tests that require patient visits. This saves time and money for both the patient and the health care system.

Safe indoors

Bio-fires are much safer to use indoors compared to real fires, as they produce no smoke or ash, nor carcinogenic fumes. They don't release carbon monoxide which is deadly if inhaled. The bio-ethanol fuel that they use is flammable, however you must be extremely careful when handling the burner and refuelling your fire. The fuel should only be added after the burner has been turned off and the fire has cooled. Any spills should be cleaned immediately.

The company's diagnostic FilmArray system--BioFire Torch and BioFire 2.0--are simple to use and can run eight different diagnostic panels cleared by the US Food and Drug Administration, three additional panels authorized for use in emergency situations and six environmental test panels. The tests include a revolutionary respiratory panel that was developed to rapidly identify and differentiate between respiratory illnesses including COVID-19 as well as emerging coronaviruses.

The COVID-19 panel was granted a grant from the Biomedical Advanced Research and Development Initiative (BARDI) which is part of the US Department of Defense's Strategic Access Program. The COVID-19 system is based upon antigens and allows doctors to differentiate symptoms caused by COVID-19 from other respiratory illnesses. This test has a similar level of accuracy to the rapid antigen tests that are currently used.

Additionally the company is in the process of developing an SARS-CoV-2 assay for their Respiratory 2.1 Panel. The multiplexed nucleic acid amplification test will be available on the BioFire filmArray 2.0 and Torch Systems and will detect SARS CoV-2 and 21 respiratory pathogens using saliva and nasopharyngeal samples in less than a half hour. The assay will be developed within a short time frame, and FDA approval for EUA and 510(k) is expected to be granted in Q3 2020.

While bio-ethanol flame-effect fireplaces are extremely safe to use, they must be kept away from combustible materials like blankets, curtains and cushions. You should never place them close to anything that could catch fire. Keep any flammable objects away from the fires that cause flames by at minimum 10 feet. The bioethanol fuel should be kept in a secure, dry space that is not easily accessed by pets or children.

Simple to use

The bioethanol fireplace does not have a chimney to be concerned about. You only need a place to store it as well as fuel. After you've filled the burner with fuel, ignite it up. This will create the appearance of a fire that is like the real flame. After the flame has been ignited it will warm the room with little or no smoke. It also produces heat similar to a wood-burning biofuel fireplace insert. They are also easy to maintain and do not require any maintenance. A quick clean is all they require.

Contrary to most tests that are rapid however, the BioFire RP2.1-EZ test employs a syndromic approach to identify common symptoms of infectious diseases and can return results in about 45 minutes. This test is suitable for patients with symptoms of upper respiratory tract and has a specificity rate of 98%. The test can detect up to 19 bacteria and viruses in one sample, making it a great option for managing patients.

The BioFire platform combines multiplex testing, sample preparation, and results reporting into one platform. This lets laboratories to streamline their workflow and eliminates the requirement for a sequential process that requires a separate and send-out tests. This can lead to better patient outcomes by enabling the appropriate test to be utilized the first time and by eliminating the need for expensive culture-based tests. The BioFire system can identify pathogens on a cell level as well as their antimicrobial resistance gene. This information is more sensitive than the traditional methods.

Molecular diagnostics is increasingly used to improve the quality of patient treatment. The BioFire RP2.1 plus panel employs a syndromic approach to simultaneously target 23 of the most frequently implicated pathogens in respiratory infections. The assay can be run on the BioFire FilmArray 2.0 and Torch systems, and delivers results in about 45 minutes.

This test is available in the US under FDA Emergency Use Authorization. It will be available commercially after initial DoD requirements are met. The BioFire Defense team has developed a fully automated, test-to-result assay that allows for the rapid detection of COVID-19. The assay is currently being developed and will be available once the initial DoD requirements are satisfied.