A Step-By-Step Guide To Fireplace Wall Mount From Beginning To End

Add Warmth to Your Home With a Fireplace Wall Mount

Create ambiance and warmth in your office, home or commercial space with a fireplace wall mount. They are usually easy to install and include mounting brackets that can be used for hanging or recessing into walls.

To make a simple and quick installation, follow the guidelines on the manufacturer's site. Make sure that the bottom of the fireplace and wall-mounting bracket are able to fit together. Then, secure the fireplace to the wall.

Size

A wall-mounted electric fireplace can be an amazing centerpiece to a room, creating ambiance and warmth. These units are available in various sizes that can be adjusted to suit any space. A smaller model is perfect for bedrooms, whereas larger ones can be placed in a living or family room. Some models offer an option to install them in a flush position against the wall to create an uncluttered appearance.

The height of the fireplace wall mount can also affect the appearance of a room. To create a dramatic effect most people prefer to put them higher on the wall, usually 6 to 12 inches above the ground. Others prefer to mount them at the standard TV height of 4.5 to 5 feet which lets the fire be seen from a variety of seating positions in the room.

Regardless of the size you decide to go with, there are some important things to be aware of to ensure that your fireplace is safe and efficient. For instance, you need to make sure that all combustible things are kept at least three feet away from the flame including drapes and furniture. In addition, you should ensure that the brackets for mounting are securely attached to the studs, if they are. If you cannot locate studs, use anchors made of plastic to ensure your fireplace isn't removed.

Another important factor to consider when choosing a fireplace wall mount is the amount of heat it generates. It is recommended to select a model which produces approximately the same amount as an average electric heater. Using this guideline you can be certain that your new fireplace will be able to provide enough additional heating for Electric Fireplaces; just click the next site, the entire space.

Certain fireplaces feature special features that make them stand out from competitors. Some fireplaces offer remote control operation with adjustable settings for brightness, and no-heat mode. They also come with cool-to-the-touch glass and realistic LED flames. Other notable features include a convenient built-in shelf that can be used to store electronics, and a simple installation process that doesn't require any professional help.

Installation

In contrast to a built-in electric firesuite fireplace that requires hard wiring into the electrical system in your home, a fireplace wall mount is semi-permanent. It can be installed straight onto a wall or an adjustable bracket that is hung on the wall. It is essential to choose a location close enough to an outlet that it will permit the power cord to reach it, while still providing enough clearance from nearby objects. This is in line with the manufacturer's recommendations in the manual for your owner.

Plug it in and test the LED lights and settings prior to when you begin the installation. This will let you know if the fireplace is ready to be installed or if further testing is required.

Then, you need to plan the area where you intend to install your fireplace wall mount. Depending on the model that you purchase, this might involve the installation of a bump on the wall or covering the wall with drywall. In the latter scenario ensure that you employ the correct drywall techniques, such as mudding and taping, allowing it to dry completely before proceeding.

Once the walls are prepped, secure the bracket to the wall with screws. It is recommended that they be placed into the studs that are behind the drywall. This will prevent the fireplace from being pulled away from the wall later on.

After the bracket is fixed, it's time to install the fireplace. This can vary between models, but typically there is a ledge on which the fireplace can rest, and spots to attach it to the brackets at the top. Then, you can place any additional media such as stones, embers, or logs within the fireplace.

Alternatively, some models allow you to fit the firebox and screen together to form a wall bracket. This makes installation simpler, but you should still check that everything is tight and fits correctly before completing.

Once the fireplace has been installed, you can finish the look by tacking or fixing the bracket to the wall, and then trimming the wires. You could also think about using paintable wire covers to hide the power cord if you wish.

Safety

A fireplace wall mount allows you to heat your home while saving valuable floor space. However, it is essential to take safety precautions when using this kind of fireplace. To prevent electric shock the first step is to make sure that the unit is grounded. Also, be sure to follow the instructions of the manufacturer for proper use.

It is possible to buy wall-mounted electric fireplaces that don't produce heat, but the majority of them include an electric heater to increase the authenticity of the flame effects. This usually takes the form of a fan-forced heater that blasts air through a heating element, however, some models might include an infrared heater too.

Once the fireplace has been installed, it is vital to stay clear of touching the hot surface. This can cause burns or damage the unit. To avoid the chance of a fire keep combustibles at a minimum of three feet from the fireplace. Be sure not to block the vents on the back of the fireplace.

There are additional safety features to look for when selecting the wall mount for your electric fireplace. For instance, you must be sure that the device comes with an emergency shut-off feature to prevent overheating and fires. It is also a good option to select a model that has a low output of heat, since it will help you save energy.

The material used to surround is also crucial. It is important to select a material that is safe for children as well as pets like steel, glass, or wood veneers. Additionally, you should select a model that has an LCD display or remote control to allow you to operate it with ease.

There are many types of wall-mounted fireplaces. These include electric and ethanol. The right one for you will depend on your budget and the design of your home. If you decide to go with an electric or ethanol fireplace you can be sure that it will add the warmth and sophistication to your home. You should always follow the safety guidelines given by the manufacturer. You should also ensure that your pets and family safe when using this fireplace.

Style

The style of the fireplace wall mount will determine how it will look on your walls. Some models are meant to stand out, while others blend in with the décor of your home. For example, a modern model like the Streamlined wall-mount electric fireplace features the sleek front glass design and a sleek profile. It features top venting that allows heated air to circulate smoothly while maintaining the elegant design of the fireplace. Its flat mounting and easy-to use remote make it simple to operate.

You can also find wall-mount electric fireplaces that feature mantels with a more traditional design. These units are perfect for homes that already have an open hearth, or who want to convert their fireplace that burns wood to an electric one without a chimney. These flat-wall fireplaces are available in a variety of sizes, and usually have a shelf to display decorations. These fireplaces are ideal for bedrooms, living spaces and home offices.

Gas wall-mount fireplaces are another great option for those looking to create a warm, welcoming atmosphere in their home. These units come with a traditional log-set and are available in several frame styles including natural and black. They also come with a customizable LED flame color as well as an ember bed to give you a personal design. Some models even have an integrated TV mount for additional functionality.

Certain models can be positioned directly on the wall, while others are designed to be partially or completely recessed into walls. For example, the Allusion wall-mount gas fireplace comes with a slim footprint that allows it to be recessed into 2x6 frame walls, but you can include a trim skirt to cover the exposed part of the fireplace. The Allusion features a handy remote and multiple heat settings so you can enjoy the fireplace all year long.

Surface-mounted electric fireplaces typically project from 4" to 6.5" into the room, making them more straightforward to install than fireplaces that are recessed into the wall or constructed out of the wall fires, click through the up coming web page, cavity. They're also a great option for those who don't want to deal with the hassle of drilling into their walls. If you move, you'll be able to easily move or relocate your fireplace.