The 10 Scariest Things About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they are not susceptible to rust or rot.

It is essential to clean and oil upvc window repair near me doors and windows on a regular basis. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and may even be fatal. It is important to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement will usually fit inside the old frame very easily. If you have double glazed window repairs-paned windows which are joined by internal beading, it is more difficult to remove and replace the old panes. In this situation it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you are going to attempt to remove the window panes by yourself, it is essential to wear appropriate safety gear, including thick gloves and eye protection. It is also recommended to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards will fall on the fabric instead of onto the floor where they can be trampled upon and cause further damage.

It's a great idea to cover the gap with tape after the glass has been removed. This will stop drafts and water from entering your property until a professional arrives to repair the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap is large, you might want to consider using an alarm door that comes with an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. Over time, they can develop a number of problems, including sagging. A sagging window can cause problems with light, draughts or even security. It's important to take action immediately if you discover that your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window which is sliding. First, you'll need to unblock the windows so you can access the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to check the fit after having repositioned your hinges. If you're satisfied with the fit of the window, you can tighten screws to hold them in place.

If you cannot reposition the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes their tightness to decrease. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen. Most often this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need close your window and do an experiment fit. The joints at the corners of the sash should align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it's crucial to take action. Water leaks from windows can not only cause degradation of your home's structure but also hinder your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on how severe the problem is, the old caulking might need to be removed. When it comes to uPVC repair, you must be careful not to over-caulk. This will only make your window harder to clean and reduce its energy efficiency.

It is important to check that the drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious situations, you may have to replace the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in damp conditions and can quickly spread throughout the house.

It is also important to keep in mind that if the leak originates from the glass of your double-glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be fixed by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open in a breeze It could be hinges at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical part hinges are prone to wear out over time. It's easy to replace a hinge on a window, but it's easier if someone else helps you to hold the frame.

Make sure that the uPVC hinges are open and closed in the correct direction. You can check this by looking for the arrow on each hinge. This indicates which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window repair in a particular way or by poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are always happy to offer advice.

It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It can also stop corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. First, the hinges due to wear and tear can become misaligned, this can cause an opening to appear where the sash joins the frame. They can be repaired by giving them a good cleaning, but when they're beyond repair, it may be necessary to have them realigned or replaced. In addition, the interlock could be disaligned. This is located on the hinge side and may need to be cleaned. In some cases it is possible to replace the hinges.

The second most frequent reason for draughts are the window seals. They are prone to wear or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures, and also reduce draughts.

The final method to cut down on draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. They can help stop cold air from entering and keep your home warm and cosy!

With a bit of regular maintenance and repairs windows made of upvc will continue to provide an excellent level of insulation and security for your home. However, it is important to recognise that all windows have a lifespan and there may come an point at which it is more cost-effective to replace them rather than repair them. So, if you are experiencing problems with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.