It's The Ugly Real Truth Of Suzuki Ignis Key

How to Unstick a suzuki vitara key Ignis Key

Suzuki's funky and affordable city car receives a midlife refresh. It's not a hot-hatch, but it can eat dirt roads in rural and urban areas with aplomb, and its nifty turning circle makes town centre driving effortless.

The new model also comes equipped with smart driver assistance and safety technology such as lane departure warning and sleepiness detection alarm, which are welcome additions on long drives.

Steering Lock

The steering lock is a security measure that stops your Ignis from being taken when it's in gear. It's a vital safety measure, but it can be a pain when you have to go somewhere and you can't unlock the wheel. Fortunately, there are some easy solutions to solve the issue.

Check first that the ignition switch is set to "on". Then, if this is the case, try to turn the key in the direction you were turning before the wheel got locked. This may be a bit tricky however it's usually enough to unlock the wheel.

If the wheel does not unlock If it doesn't, you can spray a little of canned air into the ignition cylinder to lubricate it. Be sure to wear eye protection prior to doing this so that you don't get any air that has been sprayed into your eyes! You can also make use of liquid graphite to lubricate your cylindrical.

If none of these works it is necessary to replace the ignition assembly. This component is easily found at any auto parts store. Just ensure you buy the exact replacement and compare it to the original before you attempt to install it. Take off the cover from the ignition to reveal the assembly.

Worn

The steering lock can be a bind to the ignition switch, causing the key to be stuck. This is a safety feature that prevents your Ignis from spinning away while the engine is running. If this happens, turning the steering wheel will free it.

Over time, your Ignis key may wear out and become more difficult to turn. It may not happen as often as a malfunctioning switch, but it does happen. If this is the case, you must replace your key.

Find out if anything can block your Ignis ignition key from gaining access to the cylinder. There could be debris or dirt that can get stuck inside the ignition cylinder and prevent it from turning.

You can also try using a small amount of lubricant to see if it helps. There are a myriad of types of lubricant that you can purchase, so take a look around your garage or go to an auto parts store in your area to find one that is able to work.

Another option is to use a silicon "glow in the dark" key cover. These covers absorb light and release it into dark or hazy conditions. They also protect your keys from wear and tear. They are available for a variety of suzuki alto key programming models and can be bought on the internet or at a Suzuki dealership near you.

Bent

Over time and through repeated use, keys can become bent. This can cause the teeth on the key to not engage with the lock cylinder in the same way and prevent the key from turning in the ignition. In this instance you'll need to replace the key suzuki. If you have a spare key, it's best to have it duplicated, and keep it in a safe place.

Another possible cause is the ignition cylinder itself can wear out. If the lock pins inside get stuck or stuck together this could prevent keys from going completely into or out of the cylinder. Replacing the cylinder can solve this issue, however it is best to do it before the key is stuck in the ignition to prevent further damage.

If your key from Ignis is still stuck after trying the easier things to fix It could be the right time to consider lubricating the cylinder. Graphite or liquid graphite could allow the lock pins move more freely, and thus unbind your key. You can buy it in a lot of auto parts stores. Make sure that you put your Ignis in park before applying the grease. Do not try to manhandle the Ignis to loosen it. This could result in more serious problems.

Broken

If you've tried everything else to remove a key but it's still not moving the key, your final option is to try some oil. You can purchase this from your local auto parts store and apply it to the inside of the ignition lock cylinder using a cotton ball, or a rag. Move the key back and forth gently to spread the lubricant around and then try again. Try to massage it forward, but take care not to press too hard, as you could cause damage to the cylinder.

The key's internal circuitry can be unable to function due to wear and tear. This isn't the case as often, and you'll need to have a duplicate key made.

In the end, the case of the case of your Suzuki key fob may be damaged or worn out. This is especially true in the case of a low-cost replica key fob with a plastic or rubber shell. The Key Crew may be capable of moving the internal circuitry of your old keyfob into an alternative case based on the circumstance. This where can i get a suzuki key made save you the expense of buying a new keyfob. When we call to set up your service, we'll inform you if this is a viable option.