The History Of Ghost Immobiliser Install

Autowatch Ghost Immobiliser Installation

The Ghost is the UK’s most advanced aftermarket immobiliser for CAN buses. It's discreet, doesn't use keys or LEDs and is concealed within the wiring of the vehicle.

The user may also turn off the system temporarily using Transport Mode when renting out their car. This guide will walk you through the process of installing a Ghost immobiliser.

Professional Installation

The Autowatch ghost immobiliser 2 immobiliser is a cutting-edge security device that protects your vehicle from key cloning, hacking and relay attacks. The system connects directly to your car's ECU and is protected by a unique pin code that you can choose. It is not detected by thieves using diagnostic scanners and other modern methods. It isn't able to be disabled with circuit cuts.

The system is easy to use, but professional installation is recommended to ensure a smooth connection to the ECU of your vehicle. Installers certified by Thatcham can assist with the installation and programming of your ghost immobiliser and tracker system. They can also recommend a tracking or alarm system to complete the protection package for your vehicle.

First, the installer must disconnect your battery to prevent the possibility of airbag deployment and short circuits. Once this is done the installer is now able to begin work. Basic hand tools can be used for precise connections. A multimeter is a great tool to test electrical values. Insulation tape and cable ties are also vital for protecting connections and keeping wiring tidy. Lastly, the user manual provides specific guidance tailored to your Ghost Immobiliser model.

During the installation, it is crucial to select an area for grounding that is free of any paint or debris. The installer should also make sure the immobiliser's CAN H and CAN L wires are connected to the appropriate ports on your vehicle's ECU. Based on the model, these wires might require soldering or plugged in. To ensure a secure and long-lasting connection it is recommended that you choose a high-quality plug.

Transport Mode can be activated by the client after the installation is completed. This permits mechanics or valet parking to use the vehicle without knowing the pin code. The customer must press the icon for service on the dashboard five times within 2 seconds. The system will confirm this by displaying five indicators.

The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's an excellent choice for those who rent their vehicles often on platforms like Turo. An immobiliser can reduce insurance rates, as it reduces the risk cost of ghost immobiliser theft.

Getting Started

If you're seeking a solution to secure your vehicle from thieves it is best to go with an autowatch ghost immobiliser. It protects your vehicle from being started if a criminal steals or copies the key. This is due to its sophisticated technology, which is designed to prevent the engine from starting without the correct PIN code is entered.

The device is connected to the vehicle's bus system CAN, allowing direct communication with the ECU. It uses buttons that are already present on the dashboard and wheel to create a unique sequence that only you know, making it impossible for others to start your car. This is the best way to safeguard your pride and joy. It will not lose its value if you ever want to sell it.

Installing a ghost immobiliser is a simple process, but it's important to follow the directions carefully to avoid issues with electricity and system malfunctions. You must first locate a power supply of 12V and a suitable grounding for the chassis of your car. Then, you'll be able to begin connecting the wires to the immobiliser. Make sure to use high-quality connectors and soldering techniques to ensure a secure connection. Also, ensure that you cover the connections by using heat shrink tubing or insulation tape to shield them from electrical short circuits and other problems.

Once the wires are connected, you are able to reconnect the battery and start the engine to test the function of the immobiliser. When everything is functioning correctly then you can put it in a secure location beneath the dash or anywhere else in the vehicle. Make sure to hide it well to prevent any thief from taking advantage of it.

The Ghost 2 immobiliser (why not find out more) is TASSA (Tracker and Aftermarket Security System Association) certified this means it complies with the highest standards of security and is an excellent deterrent to car thieves. It provides superior protection against key cloning, hacking, and relay attacks. It cannot be disabled without knowing the code. The device is also simple to use and can be put into an auto valet mode so that your vehicle will not be activated when you bring it in for servicing or an MOT.

Wiring

The Ghost Immobiliser is a cutting-edge security system that's designed to stop theft of vehicles. It communicates with your vehicle's ECU and directly connects to the CAN bus. The Ghost Immobiliser does not interfere with the factory settings of your vehicle, unlike other aftermarket systems that require the removal of circuit elements.

The system is also unnoticeable by thieves using scanners for diagnostics. This is due to the fact that it does not transmit and receive radio frequency signals, and it relies on CAN data to communicate with your ECU. Furthermore, it doesn't require any modification to your vehicle's existing key fobs.

To use the Ghost Immobiliser, simply switch on the ignition of your car and enter your disarm sequence (either one or two buttons). The indicator will flash twice to verify that you have entered the correct code. You can now start your vehicle and drive in a safe manner.

Once installed, the Ghost Immobiliser protects your car against hacking or key cloning, while protecting its value. In Transport Mode you can temporarily disable the Ghost Immobiliser if you need to hand your vehicle to service or valet parking.

To complete the Ghost Immobiliser installation, you'll have to locate the source of power that is constant (12V) and a grounding point. Be sure that they are well-insulated and safe to touch. Cable ties are also suggested for bundling and securing the wires. This reduces the possibility of theft by thieves. Be sure to double-check the position of these points to avoid committing a mistake, and mark them with the help of tape or a label. It's recommended to check all connections for signs wear and tear. Make sure all connections are in place, and properly protected. Don't forget to test the ghost vehicle immobiliser Immobiliser after the installation is complete. This will ensure that the unit is operating properly and that all connections and insulation are safe. If you encounter any issues, make sure to address them immediately.

Testing

The Autowatch Ghost immobiliser is an innovative vehicle security system that integrates seamlessly with your vehicle's ECU to prevent unauthorized motor starting. The innovative technology it uses protects your vehicle from key cloning, hacking, and other typical tactics thieves employ to steal cars. The Ghost works in conjunction with existing alarm and tracking systems to offer the ultimate protection for your vehicle. The Ghost's unique features, coupled with its discreet design, make it a popular choice for drivers who love cars and security-conscious drivers.

To ensure the proper integration of the Ghost Immobiliser, it is essential to follow all steps of the installation procedure. Consult the wiring diagram of the vehicle as it will assist you in locating and connecting the wires. Then, you'll need to identify the power source and grounding points. Once these are found, you'll have to mark them in a way that they are easy to locate when installing. It's important to use high-quality materials and tools. Hand tools are a must with making precise connections while a multimeter can confirm electrical values and guarantee safety. Cable tie and insulation tape ensure that all connections are neat. Finally, a user manual will give specific guidelines tailored to your Ghost model.

Before beginning the installation, it's important to test the system by entering the PIN code, then starting the vehicle. This test will verify that the immobiliser is working as intended, preventing unauthorised vehicle starts. It's recommended to perform this procedure regularly as part of your regular inspections of the vehicle to ensure the system is working properly.

After the installation is completed, you can begin driving your car with confidence. The Ghost will guard your car from thieves who might steal your car. It will ensure that no one is able to escape with your car even if they don't have the correct PIN code. The ghost immobiliser car can also be linked with a Thatcham-approved tracker to detect any attempts at tampering or theft, allowing you to locate your vehicle if it's stolen.

The Ghost is compatible with a wide variety of vehicles, including those made by all major manufacturers. If you're interested in securing your car with this cutting-edge device, call Monty's Locksmith today to find out more about our installation and service options. We are a TASSA Registered installer, a certification that guarantees that we follow strict standards and procedures for installing our products. This guarantees customers, insurance companies, and law enforcement agencies that installations are carried out safely and properly.