Ten Patio Door Repairs That Really Change Your Life

Tilt and Slide Patio Door Repairs Near Me

Whether you enjoy hosting friends or just spending time outdoors, patio doors are a great way to transition from indoors to outdoor. You might need to adjust your patio door if it is not sliding patio door repair service smoothly.

Find the screws for adjusting in the bottom rail, then remove the plastic plugs to raise or lower the door. Verify that the door is even and moves smoothly (Photo 1).

Window Treatments

Be aware of privacy, light control and aesthetics when selecting window treatments for sliding doors. For instance, do you want to keep the sunlight from shining on your furniture and artwork, or do you prefer let the sunlight in only when the sun is low in the sky?

The type of window treatment you choose can also give you an individual look. If your sliding glass patio door repair patio door has one glass pane, you can make use of mullions to divide the pane into smaller pieces for a more stylish look. Window treatments are available in soft and hard materials. They can range from cellular shades, roller shade or woven wood shades and drapes to curtains drapes and valances. They can be placed on top of other window treatments, like a swag, or used on their own.

Vertical blinds are among the most sought-after window treatments for patio door. They feature large fabric panels, also known as vanes, which tilt open and close, allowing you to control the amount of light entering your home. They can be operated using a wand or a chain and cord.

Another alternative for sliding patio doors is window films that offer energy savings and glare control. They can be added to your sliding door as an alternative to window treatments, like cell shades.

For a more traditional appearance it is possible to choose the look of a swag or valance on your sliding door. They are available in a variety of fabrics and colors and come in classic tab, pinch pleat and grommet designs. You can also get them in a blackout liner for additional privacy and control of light.

Remember that patio doors must be able to slide open and close. It is recommended to hang window treatments at a height to allow them to perform this purpose. This will also help keep them out of reach for pets and children.

If your window treatments aren't in the shape of a window valance, or do not have a rod pocket, you can use a traverse bar that allows them to move horizontally across your sliding doors. Make sure you hang them an inch above the top of your patio doors to prevent them from brushing heads passing through.

Rollers

If your patio door starts to sound squeaky, it's typically due to worn rollers. These rollers are on the bottom of the doors and allow them to slide easily along a track. They could become stuck or simply become rusty over time. This can make it difficult for you to open and shut the doors and create loud noises when in motion. Fortunately, there are a few things that can help you fix your sliding doors so that they can slide and close easily again.

The first thing you should try is to lubricate the tracks. This will make the door move more easily and should be done two times each year. A quality lubricant can be bought at your local hardware store. If you have vinyl tracks you can use a silicone spray. If you have wooden tracks, try an oil-based lubricant made of wax. If the lubricant does not work, you may need to replace the rollers.

You can also try to adjust the rollers. This is a two-person job because you need to raise the door and locate the plastic adjustment screws at the bottom of the track. The screws have a tiny plug which needs to be removed with an screwdriver. You can then turn these screw to raise or lower the rollers and allow the door to come in contact with a smaller portion of the track.

Another reason to consider is the door not sitting properly on the track. This could result in an opening between the frame and door and result in cold air entering on a cold day, or hot air escaping out on a hot one. If this is the case you'll have to take off the door and frame to see what is causing it to gape.

If the gap is caused by the track, you can repair this by removing the top layer of the track and then fixing it. The installation of new tracks can fix the gap, giving the door something to rest on when it's in use.

Tracks

It could be time to lubricate your tracks if they aren't closing or opening smoothly. It's a simple job that can improve the performance of your patio doors.

Remove the door and set it on a flat surface of the way as you work. If the door is heavy, it might be required to have a second person assist you in lifting and holding it while you work. Utilizing brushes and hot soapy water, thoroughly vacuum the track of the sliding door. If the doors have blinds on the glass, be sure to clean them as well.

For Next Dimension vinyl patio doors dirt and dust may build up near the tilt and raise/lower operators and can affect the operation. If your door is equipped with these, make sure to clean the surfaces regularly with a vinegar-water solution or a household window cleaner.

Signature and Pro patio doors feature an anti-lift block that is located in the head pocket. Therefore, they require an opening of 3 to 6" opening to eliminate this feature and allow the sill track to drop. Slide the sash/panel into the open position, then lift it up to tilt it inward. This will open up the sill pocket to allow the track to lower away from the head jamb. Repeat the procedure for both sides the panel/sash.

Glass

It could be a concern if your patio door glass is cracked. It may block sunlight from entering your home, and can also leave the space unusable until the glass is replaced. Glass that has cracked can be dangerous, since it could shatter and cause injuries if someone gets hit in the head with shattering pieces.

It's fairly simple to repair damaged frames and doors. The first step is to clean the glass and remove any dirt or dust that has built up over time. After cleaning the glass, you can apply a clear coating to shield it from the elements. You can also apply decorative film to the doors to enhance their privacy and appearance.

If your sliding glass door isn't gliding smoothly, it could be because of an unaligned roller. It is typical to find adjustment screws at the bottom of the door, and they are usually covered by trim caps. If you're unable to locate the screws, try lifting or lower the door until it looks identical to the track.

Be sure to have all the tools you need before you begin to repair sliding doors. You'll require a screwdriver, a wrench, and some caulk or putty made of plastic. You'll also need to move any furniture away from the door to ensure you can work on it quickly. It's also recommended to put blankets or foam sheets under the door to protect it from scratches when you take it off and set it down.

The first thing our engineers do when they arrive at a site to fix the tilt and slide patio sliding doors repair door is to identify the manufacturer of the mechanism. You can do this by removing the covers from the rollers (bogies), which are found at the bottom of the door. Alternatively, you can look for an identification label on the handle or side panel. If you are unable to locate the label, it's recommended to contact the manufacturer.